WT2100L Redundant Link Tester_Beijing wenrise technology co. LTD

WT2100L Redundant Link Tester

Product model：WT2100L Port type：RJ45 10/100/1000M Number of links：4 Function：Redundant Link Tester

The redundant link tester provides automatic link on-off capability and accurate switching time measurement capability, which can realize automatic alternating switching of primary and backup links, which can easily verify the switching performance of primary and backup links, and provide sufficient basis for verifying and improving redundant network systems.

Redundant Link Tester

功能描述-冗余.png

Connected in the network system, the on/off of the Ethernet link can be controlled in real time through software to simulate the physical failure of the communication link.
For redundant network systems with primary and backup links, the switching time of the primary and backup links can be accurately measured.
It provides automatic alternating switching of primary and backup links, which can realize the automatic cyclic on-off test of multiple primary and backup links.
It can be connected to the network system for a long time, and the data is directly transmitted by default, which does not affect the normal operation of the original system.
It is widely used in test systems and debugging systems carried over Ethernet.

Functional Mode	Redundant Link Tester
Link Resources	A single equipment supports two sets (4 links) of primary/backup links, and a single client supports up to 4 equipment operating at the same time
Functional Mode	Changing time measurement of primary and backup link Redundant links cycle on and off
Accuracy of link switching time measurement	20ns
Set conditions to determine whether the link is connected or not	Any message/non-broadcast message/custom condition
On-off Switching Mode	Manually perform single-link switchover Single-link automatic cyclic switchover The primary and backup links are switched alternately in cycles

Last Next