WT2100TB Network Tester_Beijing wenrise technology co. LTD

WT2100TB Network Tester

Product model：WT2100TB Port type：RJ45 10/100/1000M Number of ports：24 Function 1：Standard Network Tester Function 2：Basic Network Tester

Multiple functions on one device	Flexible and easy-to-change function modes in one single device	1U portable chassis	Fanless and noiseless

Tests can keep running after disconnecting the client GUI	Impairment emulating and traffic generating can run in one device simultaneously	1GE ports support user-defined Preamble and SFD	Ports with switch chip can be turned on/off physically by client GUI

The WT2100TB provides wire-speed traffic generation with gigabit electrical ports, can configure up to 64 streams per port, change the speed based on port or stream, can support common packets and custom packets. A single client supports up to 4 equipment. The WT2100TB supports 8-port standard Network Network Tester mode and 24-port basic Network Tester mode, both of which support RFC2544 testing, which can easily meet the needs of multiple test scenarios such as complex network traffic emulation and high port density testing.

Number of ports	Standard Network Tester	Basic Network Tester	RFC2544
2 ports	√		√
4 ports	√		√
6 ports	√		√
8 ports	√	√	√
12 ports		√	√
16 ports		√	√
24 ports		√	√

Functions

Network Tester

功能描述-流量.png

WT2100 has 24 10/100/1000M RJ45 ports.
Line rate traffic transmitting and receiving capability.
Industry-leading traffic scheduling accuracy.
Up to 64 independent streams on a single port.
Independent start/stop of each stream on the same port.
Support port-based or stream-based speed control.
Each stream has 6 VFDs, making it easy to simulate multiple end devices in a single stream.
Provide a variety of protocol templates and support customized frames.
Provide ultra-short frames and jumbo frames generation.
Support user-defined Preamble and SFD.
FCS error generation.
Test traffic can still be running without client GUI connected, and you can continue to run the tests and check the statistics after reconnecting the client.
A single client can manage up to 4 WT2100/WT2200 simultaneously that provides higher port density testing capability.
Provide API for test automation.

Parameters

Product Model	WT2100TB
Physical Interfaces	10/100/1000M RJ45 x 24
Dimensions	259mm x 183.6mm x 44mm
Power Consumption	20W
Operating Temperature	0 - 45℃
Operating Humidity	≤95%, RH

Function Mode	8-port Standard Network Tester	24-port Basic Network Tester
Port Type	8 x 10/100/1000M RJ45	24 x 10/100/1000M RJ45
Port Based Scheduler	Up to 64 streams per port	Up to 24 streams per port
Stream Based Scheduler	Up to 64 streams per port	Up to 24 streams per port
Protocol Type of Frames	EthernetII, IP, APR, UDP, TCP, VLAN, QinQ, Custom	EthernetII, IP, APR, UDP, VLAN, QinQ, Custom
Variable Field Data (VFD)	Each stream has 6 VFDs and supports the modification of Source/Destination MAC, Source/Destination IP, and VLAN ID.	-
Port Based Statistics	·Transmitted packets, received packets, transmitted frames per second (fps), received frames per second (fps), transmitted bits per second (bps), received bits per second (bps), received FCS error pakets ·Received filtered packets, received filtered packets rate (fps)	·Transmitted packets, received packets, transmitted frames per second (fps), received frames per second (fps), transmitted bits persecond (bps), received bits per second (bps), received FCS error pakets
Stream Based Statistics	·Transmitted packets, received packets, transmitted frames per second (fps), received frames per second (fps), transmitted bits per second (bps), received bits per second (bps), received FCS error packets, Min Latency, Average Latency, Max Latency, Payload Checksum Error Packets ·Real-time packet loss, real-time packet loss rate, misordered packets, Min jitter, Avg jitter, Max jitter	·Transmitted packets, received packets,transmitted frames per second (fps), received frames per second (fps), transmitted bits per second (bps), received bits per second (bps), received FCS error packets, Min Latency, Average Latency, Max Latency, Payload Checksum Error Packets
Payload Checksum	Support stream-based payload checksum error statistics
Filtered statistics	Support port-based packet filtering statistics	-
Control of Streams	Each stream can be started and stopped independently
Transmit Control	continuous, burst (once or multiple), time
Frame Length Type	fixed, random, increase
Frame Length Range	46-16383 Bytes
Payload Type	fixed, random, increase	fixed, random
Error Packe Generation	Stream-based FCS error packet generation
FCS Error Statistics	Port-based FCS error packet statistics
Address Learning	Automatic generation of Layer 2 and Layer 3 address learning packets according to traffic settings
Port Switches	·Port 1-8 have individual switch chip for each port ·Automatic cyclic switch of ports according to settings and generate port status change logs
User-defined Preamble & SFD	Support user-defined Preamble and SFD
Offline Running	Test traffic can still be running without client GUI connected, configurations and statistics will be kept intact after reconnection
Multiple Chassis Operation	A single client can operate four chassis simultaneously.
Multiple Clients Operation	Multiple users can use the same chassis simultaneously.
Test Suite	RFC2544
Others	GUI client API for test automation

Recommend

QQ friends
QQ Zone
Sina Weibo
Renren.com
Douban

Last Next