WT2300B Network Tester_Beijing wenrise technology co. LTD

WT2300B Network Tester

Port type：SFP+ Number of ports：8 Functional description：Network tester

Product highlights

Multiple functions on one device	Flexible and easy-to-change function modes in one single device	1U portable chassis	Fanless and noiseless

Tests can keep running after disconnecting the client GUI	Multiple users on one device simultaneously	One single client can manage multiple chassis simultaneously	Support R&D mode and Production Line Test Mode

Ethertone Network Tester provides wire-speed traffic generation with up to 64 streams per port, supports two test modes of high performance and high port density, and supports RFC2544 testing, which is available in a variety of network equipment test scenarios.

Function Modes

Optional Port Combination

Basic Network Tester

8×1G SFP,

8×2.5G SFP,

8×10G SFP+,

4×1G SFP+4×2.5G SFP,

4×1G SFP+4×10G SFP+,

4×2.5G SFP+4×10G SFP+

Functions

Network Tester

功能描述-流量.png

WT2200 has 8 1G/2.5G/10G SFP+ ports.

Line rate traffic transmitting and receiving capability.
Industry-leading traffic scheduling accuracy.
Up to 24 independent streams on a single port.
Independent start/stop of each stream on the same port.
Support port-based or stream-based speed control.
Provide a variety of protocol templates and support customized frames.
Provide ultra-short frames and jumbo frames generation.
FCS error generation.
Test traffic can still be running without client GUI connected, and you can continue to run the tests and check the statistics after reconnecting the client.
A single client can manage up to 4 WT2300 at the same time that provides higher port density testing capability.
Provide API for test automation.

Parameters

Product model	WT2300
Physical Interfaces	1G/2.5G/10G SFP+ x 8
Dimensions	320mm x 190mm x 44mm
Power Consumption	20W
Operating Temperature	0 - 45℃
Operating Humidity	≤95%, RH

Function Mode	Basic Network Tester
Port Type	8 x 1G SFP 8 x 2.5G SFP 8 x 10G SFP+ 4×1G SFP+4×2.5G SFP 4×1G SFP+4×10G SFP+ 4×2.5G SFP+4×10G SFP+
Load on Port	Up to 24 streams per port
Load on Stream	Up to 24 streams per port
Protocol Type of Frames	EthernetII, IP, APR, UDP, VLAN, QinQ, Custom
Port Based Statistics	·Transmitted packets, received packets, transmitted frames per second (fps), received frames per second (fps), transmitted bits persecond (bps), received bits per second (bps), received FCS error packets
Stream Based Statistics	·Transmitted packets, received packets, transmitted frames per second (fps), receivedframes per second (fps), transmitted bits persecond (bps), received bits per second (bps),received FCS error packets, Min Latency, Average Latency, Max Latency, Payload Checksum Error Packets
Payload Checksum	Support stream-based payload checksum error statistics
Control of Streams	Each stream can be started and stopped independently
Transmit Control	continuous, burst (once or multiple), time
Frame Length Type	fixed, random, increase
Frame Length Range	1GE/2.5GE Ports: 46-16383 Bytes 10GE Ports: 60-16383 Bytes
Payload Type	fixed, random
Error Packet Generation	Stream-based FCS error packet generation
FCS Error Statistics	Port-based FCS error packet statistics
Address Learning	Automatic generation of Layer 2 and Layer 3 address learning packets according to traffic settings
Offline Running	Test traffic can still be running without client GUI connected, configurations and statistics will be kept intact after reconnection
Multiple Chassis Operation	A single client can manage up to 4 Chassis at the same time
Multiple Clients Operation	Multiple users can use the same chassis simultaneously.
Test Suite	RFC2544
Others	GUI client API for test automation

Recommend

QQ friends
QQ Zone
Sina Weibo
Renren.com
Douban

Last Next