Ethertone WT2200_Beijing wenrise technology co. LTD

Ethertone WT2200

Port type：RJ45/SFP+ Number of ports：16+4 Function 1：Standard Network Tester Function 2：Basic Network Tester Function 3：Impairment Emulator

Ethertone WT2200 is a multi-functional instrument that integrates Ethernet Impairment Emulator and Network Tester.

Product highlights

Multiple functions on one device	Flexible and easy-to-change function modes in one single device	1U portable chassis	Fanless and noiseless

Tests can keep running after disconnecting the client GUI	Impairment emulating and network tester can run in one device at the same time	1GE ports support user-defined Preamble and SFD	Ports with switch chip can be turned on/off physically by GUI

	The Ethernet Impairment Emulator combines comprehensive network emulation to enable you to generate impairments in an accurate and repeatable way that occur in a real WAN including latency, misorder packets, loss of packets, duplicated packets, errored and modified packets, background traffic and bandwidth control.
	Ethertone Network Tester provides wire-speed traffic generation with up to 64 streams per port, supports two test modes of high performance and high port density, and supports RFC2544 testing, which is available in a variety of network equipment test scenarios.

Function Modes	Optional Port Combination
Impairment Emulator	4 x 1G RJ45 + 4 x 1G SFP, 2 x 1G RJ45 + 2 x 10G SFP+
Standard Network Tester	4 x 1G RJ45 + 4 x 1G SFP, 4 x 1G RJ45 + 2 x 10G SFP+, 4 x 10G SFP+
Basic Network Tester	16 x 1G RJ45 + 4 x 1G SFP, 16 x 1G RJ45 + 4 x 2.5G SFP, 12 x 1G RJ45 + 4 x 10G SFP+
Impairment Emulator + Standard Network Tester	2 x 1G RJ45 + 2 x 1G SFP impairment emulator + 2 x 1G RJ45 + 2 x 1G SFP standard network tester

Functions

Impairment Emulator

功能描述-损伤.png

With 1G/2.5G/10G port bidirectional impairment emulation function.
It has a wide range of impairment functions and can accurately emulate impairment at linear velocity stream.
Jitter latency can be realized by generating a latency for all packets or for specific
packets according to specific conditions.
It can cause impairment such as discarding, duplication, reorder, and modification to all packets or specific packets according to specific conditions.
Packets with specific content can be inserted at a specific rate, and ultra-long frames, ultra-short frames, and FCS error frames can be constructed and inserted.
The available bandwidth can be limited according to the specific ratio to support
bandwidth jitter.
BER Simulation can be generated at a specific ratio.

Network Tester

功能描述-流量.png

WT2200 has 16 10/100/1000M RJ45 ports and 4 1G/2.5G/10G SFP+ ports.

Line rate traffic transmitting and receiving capability.
Industry-leading traffic scheduling accuracy.
Up to 64 independent streams on a single port.
Independent start/stop of each stream on the same port.
Support port-based or stream-based speed control.
Each stream has 6 VFDs, making it easy to simulate multiple end devices in a single stream.
Provide a variety of protocol templates and support customized frames.
Provide ultra-short frames and jumbo frames generation.
Support user-defined Preamble and SFD.
FCS error generation.
Test traffic can still be running without client GUI connected, and you can continue to run the tests and check the statistics after reconnecting the client.
A single client can manage up to 4 WT2100/WT2200 at the same time that provides higher port density testing capability.
Provide API for test automation.

Parameters

Product model	WT2200
Physical Interfaces	10/100/1000M RJ45 x 16 + 1G/10G SFP+ x 4
Dimensions	290mm x 190mm x 44mm
Power Consumption	20W
Operating Temperature	0 - 45℃
Operating Humidity	≤95%, RH

Function Mode	Ethernet Impairment Emulator
Number of Links	Single device provides 2 links of 1G RJ45 + 2 links of 1G SFP
Link Operation	Impairments can be set independently for each channel of the link and can be started and stopped separately or concurrently Support to filter FCS error frames on the line
Latency	Fixed Latency	·Range of values: 0.01ms-120s ·Max. delay at full line rate: 40s at 100Mbps, 4s at 1000Mbps
Latency	Variable Latency	·Range of values: 0.01ms-120s ·Jitter period: 1ms-2500s ·Jitter model: Incremental / decremental / convergent / divergent / sinusoidal / dual channel / custom
Packet Loss	Fixed Rate	Range of values: 0.001-100%
	Variable Rate	·Range of values: 0.001-100% ·Jitter model: Incremental / decremental / convergent / divergent / sinusoidal / dual channel / custom
	Cyclic Loss	Range: 1-131071
Duplication	Fixed Rate	Range of values: 0.001-100%
Duplication	Variable Rate	·Range of values: 0.001-100% ·Jitter model: Incremental / decremental / convergent / divergent / sinusoidal / dual channel / custom
Misorder	Range of Values	0.001-100%
Misorder	Range of Delay	0.01ms-120s
Background Traffic	Range of Line Rate	0.001-100%
Background Traffic	Settable Frame Content	·Protocols: Ethernet, IP, UDP ·Frame length type: Fixed, Random ·Frame length range:19-16383 Bytes ·Payload type: Fixed, Random ·Frame error creation: Support to generate FCS error frames
Modification	Range of Values	0.001-100%
	Template Based Modifications	EthernetII, IP, UDP, TCP, VLAN (Support QinQ), MPLS
	Customized Modifications	·Specify the location and content of the byte to be modified ·Modify up ot 12 independent bytes with per packet. Each byte can be modified by bits.
Bandwidth Control	Fixed Bandwidth	Range: 0.001-100%
Bandwidth Control	Variable Bandwidth	·Range of variation: 0.001-100% ·Period of variation: 1ms-2500s
BER Simulation	Range of BER	10^-2-10^-14
Packet Filter	Impairment With Packet Filters	Latency, Packet Loss, Duplication, Misorder, Modification
Packet Filter	Matching methods	·Template: src/dst MAC, frame type, src/dst IP, UDP src/dst port number, TCP src/dst port number, VLAN ID, VLAN priority (QinQ supported), MPLS label, MPLS TC ·User-defined: Specify the location and content of the byte to be matched ·Range matching: Packet Loss can match specified bytes in a range of values
Statistics	Channel-based Impairment Statistics	Number of error bits, packet count of latency, loss, duplication, Misorder, background traffic, modification
Statistics	Channel-based Traffic Statistics	·Number of rx packets, number of tx packets, rx rate (fps, bps, %), tx rate (fps, bps,%), number of received FCS error packets ·Channel-based graphical statistics of packet rate
Multiple Chassis Operation	A single client can operate four chassis simultaneously.
Multiple Clients Operation	Multiple users can use the same chassis simultaneously.
Others	GUI client API for test automation

Function Mode	Standard Network Tester	Basic Network Tester
Port Type	Get the required ports by changingmodes 4 x 1G RJ45 + 4 x 1G SFP 4 x 1G RJ45 + 2 x 10G SFP+ 4x10G SFP+	Get the required ports by changingmodes 16 x 1G RJ45 + 4 x 1G SFP 16 x 1G RJ45 + 4 x 2.5G SFP 12 x 1G RJ45 + 4 x 10G SFP+
Load on Port	Up to 64 streams per port	Up to 24 streams per port
Load on Stream	Up to 64 streams per port	Up to 24 streams per port
Protocol Type of Frames	EthernetII, IP, APR, UDP, TCP, VLAN, QinQ, Custom	EthernetII, IP, APR, UDP, VLAN, QinQ, Custom
Variable Field Data (VFD)	Each stream has 6 VFDs and supports the modification of Source/Destination MAC, Source/Destination IP and VLAN ID.	-
Port Based Statistics	·Transmitted packets, received packets, transmitted frames per second (fps), received frames per second (fps), transmitted bits persecond (bps), received bits per second (bps), received FCS error packets ·Received filtered packets, received filtered packets rate (fps)	·Transmitted packets, received packets, transmitted frames per second (fps), received frames per second (fps), transmitted bits persecond (bps), received bits per second (bps), received FCS error packets
Stream Based Statistics	·Transmitted packets, received packets, transmitted frames per second (fps), receivedframes per second (fps), transmitted bits persecond (bps), received bits per second (bps), received FCS error packets, Min Latency, Average Latency, Max Latency, Payload Checksum Error Packets ·Real-time packet loss, real-time packet lossrate, disordered packets, Min jitter, Avg jitter, Max jitter	·Transmitted packets, received packets, transmitted frames per second (fps), receivedframes per second (fps), transmitted bits persecond (bps), received bits per second (bps),received FCS error packets, Min Latency, Average Latency, Max Latency, Payload Checksum Error Packets
Payload Checksum	Support stream-based payload checksum error statistics
Filtered statistics	Support port-based packet filtering statistics	-
Control of Streams	Each stream can be started and stopped independently
Transmit Control	continuous, burst (once or multiple), time
Frame Length Type	fixed, random, increase
Frame Length Range	1GE/2.5GE Ports: 46-16383 Bytes 10GE Ports: 60-16383 Bytes
Payload Type	1GE/2.5GE Ports: fixed, random, increase 10GE Ports: fixed, random	fixed, random
Error Packet Generation	Stream-based FCS error packet generation
FCS Error Statistics	Port-based FCS error packet statistics
Address Learning	Automatic generation of Layer 2 and Layer 3 address learning packets according to traffic settings
Port Switches	·Port 1-8 have individual switch chip for each port ·Each port with switch can control the physical on/off via client ·Automatic cyclic switch of ports according to settings and generate port status change logs
User-defined Preamble & SFD	1GE ports support user-defined Preamble and SFD
Offline Running	Test traffic can still be running without client GUI connected, configurations and statistics will be kept intact after reconnection
Multiple Chassis Operation	A single client can manage up to 4 Chassis at the same time
Multiple Clients Operation	Multiple users can use the same chassis simultaneously.
Test Suite	RFC2544
Others	GUI client API for test automation

Recommend

QQ friends
QQ Zone
Sina Weibo
Renren.com
Douban

Last Next