CN / EN

HOME >> SUPPORT >>FAQS >> How to set the IP address of WS1008 administration port?
Details

How to set the IP address of WS1008 administration port?

Time:2018-12-25     

The management and functional operation of WS1008 is carried out through the client software installed in the upper computer (PC). In order to ensure the normal connection between the upper computer and the test equipment, it is necessary to ensure that the upper computer and the tested equipment are in the same LAN and the IP address is set in the same network segment.When WS100 is delivered, the default initial IP address (management port) is 192.168.1.254. If the IP address of WS1008 needs to be modified, enter the current IP address of WS1008 in the browser of the upper computer (enter the initial IP 192.168.1.254 for the first connection) into the configuration page for modification.


修改管理口IP.JPG


Important tip: if you need to use multiple WS1008 test devices in the same LAN, you need to modify the device management port IP to different addresses before accessing the LAN to avoid communication failures caused by IP address conflicts.




Email: sales@wenrise.com

Tel: +86-10-59713380

Addr: 607, Building No.2, Dihui International Center, 

           Shangdi 10th Road, Haidian District, Beijing

Copyright @ 2018 . All rights reserved.